|
| Home >> Product >> Finocons - ES |
| |
Finocons - ES |
| |
Finocons-ES is resin type corrosion proof cement, mainly used as jointing material. It exhibits excellent resistance to sulphuric acid in cone, as high as 92%.
This is a two component system, consisting of powder & syrup. These are mixed in the ratio of 3 parts of powder to 1 part of syrup to attain a workable mortar. It confirms to International Standard. |
| |
Physical Characteristics |
| |
 |
Colour |
Black |
|
Mixing ratio |
3:1 |
|
Density |
1800-1900 Kg/m3 |
|
Compressive strength |
>150 Kg/cm2 |
|
Tensile strength |
> 25Kg/cm2 |
|
Flexural strength with bricks |
> 50 Kg/cm2 |
|
Bond strength with bricks |
> 5 Kg/cm2 |
|
Maximum water absorption |
below -1 % |
|
Maximum service temp. |
130°C |
|
Working time (Room Temp.) |
<20 |
|
SetingTime (Room Temp.) |
<300 |
|
Shelf life |
|
| |
- Powde r: 6 Months at atm. temp. |
|
| |
- Resin : 9 Months at atm. temp. (27°C) |
|
|
| |
Preparation of Mortar |
| |
| The powder is gradually added to resin with mixing in the ratio of 1 part by weight resin & 3 part by weight powder. Batch size can be varied depending upon the temperature & working condition. When working at a very low temperature the syrup should be kept warm. Large batch should be avoided. |
| |
Applications |
| |
| It is used for setting acid proof bricks, tiles in chemical vessel, reaction tank, floors, filter nutches. It is widely used in chemical, dyestuff, petrochemical, fertilizer industries etc. When there is less severe condition it is used as pointing material. |
| |
Chemical Resistance |
| |
| Mortar can resist many inorganic, organic acids & solvents. It is not recommended for use with alkalies & for higher concentration of oxidising agents. |
| |
Packing |
| |
Powder - 25 Kg. Packed in bag.
Resin - 25 Kg. Packed in drum. |
| |
Storage & Transportation |
| |
| It should be stored in tightly closed condition, away from moisture, sunlight & direct heat. During storage & transportation it must be protected from contact with water. |
| |
Handling Precautions |
| |
| While handling the powder and during mixing, use mouth mask and goggles. It is advisable to carry our the mixing in a well-ventilated area, as the powder may cause irritation to the eyes. |
| |
|
| |
